Connector Solutions

The Amphenol Panel|Mate™ series combines flange mounting options with the proven reliability of the AT/ATP Series™ environmentally-sealed thermoplastic connection system. Engineered with a one-piece sealed flange design for rapid and secure mounting, its durable high temperature silicone facial seal provides a barrier of protection from lubricating oils, hydraulic fluids and fossil fuels to withstand the challenges and complexities of harsh environment applications.

Downloads »



Contact Type

4 Way Receptacle

RD01 Seal
Receptacle AT04-4P-PM12 Drawing

4 Way Receptacle

RD01 Seal
Receptacle AT04-4P-PM13 Drawing

2 Way Receptacle

RD01 Seal
Receptacle AT04-2P-PM12 Drawing

Pin Contacts

16-20AWG AT60-202-16141 Drawing

Socket Contacts

16-20AWG AT62-201-16141 Drawing

Pin Contacts

16-20AWG AT60-202-1631 Drawing
14AWG AT60-215-1631 Drawing

Socket Contacts

16-20AWG AT62-201-1631 Drawing
14AWG AT62-209-1631 Drawing

Tool Frame

Tool M22520/1-01


Tool M22520/1-02

Field Repair Kit

Refer to datasheet for full list of items
Kit AT-RK100 Datasheet

Features & Benefits

Wire Range
Size 12 contacts will accept wire ranges of 12-14AWG; Size 16 contacts will accept 14-20AWG.

Operating temperature range: -55°C to +125°C at rated current

Thermoplastic/Integrated latch for mating

Dielectric Value
Meets or exceeds 1500 volts minimum

Drop Test
Shall not become detached or loosened when placed at 750mm and dropped to concrete eight times.

No latch disengagement or discontinuity shall be the result when subjected to 50 g’s in each of three axis (X, Y & Z)

Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g’s at Sine sweep of 10-2000Hz)

Connector Terminal Retention
When subjected to a direct pull, contacts achieve a minimum pull-out force of 25 lbs.

Connector Retention
A mated connector subjected to a pulling force by the exiting wire bundle at 25 lbs. times the number of contacts to a maximum of 100 lbs. applying load for 30 seconds

Thermal Shock
Subjected to 10 cycles at -55°C to +125°C with no cracking, chipping or other damage detrimental to the normal operation of the connector

Insulation Resistance
1000 megohms minimum at 25°C

Mating Cycle Durability
Following 100 cycles of connection engagement and disengagement, degradation either mechanical or electrical is not evident

Contact Millivolt Drop
Size 16 contacts with 16AWG conductor – 100 mV drop max at 13A test current

Water Immersion
A mated connection, properly wired, placed in an oven at +125°C for 1 hour, then placed immediately in a depth of water of 1 meter without loss of electronic performance.

AT/ATP Series Panel|Mate™ meets all the performance criteria and specifications of the AT Series™, and is also available in a wide variety of custom colors. Consult factory for complete specifications.

PDF Downloads



Thank you! Your subscription has been confirmed. You'll hear from us soon.
Sign up to our newsletter
Get all the latest updates